MUSIC HALL MMF-9.3 / 9.3SE

Music Hall MMF-9.3 Piano Black Tonearm  with Goldring Eroica MC cartridge, platter, belt, and triple plinth construction shown.
Music Hall MMF-9.3 Piano Black Isolated motor, tonearm  with Goldring Eroica MC cartridge, platter, belt, and triple plinth construction shown.
Music Hall MMF-9.3 Piano Black Rear Photo. Shows the platter, back of the tonearm, and belt.
Music Hall MMF-9.3 Walnut. Front photo. Picture includes the isolated motor, platter, belt, tonearm with Goldring Eroica MC cartridge.
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE
Music Hall MMF-9.3 Piano Black Tonearm  with Goldring Eroica MC cartridge, platter, belt, and triple plinth construction shown.
Music Hall MMF-9.3 Piano Black Isolated motor, tonearm  with Goldring Eroica MC cartridge, platter, belt, and triple plinth construction shown.
Music Hall MMF-9.3 Piano Black Rear Photo. Shows the platter, back of the tonearm, and belt.
Music Hall MMF-9.3 Walnut. Front photo. Picture includes the isolated motor, platter, belt, tonearm with Goldring Eroica MC cartridge.
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE
MUSIC HALL MMF-9.3 / 9.3SE

jbdistr

$2,195.00 

SUPERIOR TRIPLE PLINTH DESIGN 
OUTSTANDING PERFORMANCE


THE MUSIC HALL MMF-9.3 TURNTABLE IS A TWO SPEED, BELT DRIVEN AUDIOPHILE TURNTABLE EMPLOYING THE UNIQUE TRIPLE PLINTH CONSTRUCTION ORIGINATED BY MUSIC HALL.

The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.

The mmf-9.3 comes in a high-gloss piano black lacquer finish or the 9.3SE version in walnut veneer. The MMF-9.3 and 9.3SE version are available with or without a Goldring Eroica LX cartridge.
  • Music Hall’s unique triple plinth construction
  • One-piece full carbon fiber tonearm
  • Fully adjustable VTA, azimuth, and dampened arm lift mechanism
  • Counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • Completely isolated/decoupled DC motor with 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • Motor sits on its own resonance damping puck
  • Optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus ($795 value)
  • The cartridge supplied is properly aligned and mounted
  • Piano Black lacquer or 9.3SE in Walnut veneer
  • Inverted ceramic main bearing for super quiet, fluid operation
  • Non-resonant, 1” thick acrylic platter
  • Soft felt platter mat
  • High quality gold RCA connectors and detachable phono cable
  • Adjustable tip toe feet with anti scratch cups
  • Low noise fully manual belt drive design
  • Built-in round spirit level for proper leveling
  • Dust cover and 45 rpm adaptor included
  • Excellent instruction manual and easy assembly

"...this accomplished table has an infectious ability to present music amazingly realistically, with dynamic swagger as well as with body and space."

Audio Analyst, Greg Weaver

Click logo for review:


TECH SPECS
Power Supply: 15V / 0-0.8mA DC, universal power supply
Power Consumption: 4W / OW in stand-by 
Speeds: 33 1/3 and 45 rpm 

Speed deviation: Wow and flutter: 331/3 rpm (change to 45 rpm) ± 0.1%(±0.01) % 
Rumble Max: >-73 db 
Effective tonearm length: 9.0 in (22.86cm) 
Overhang: .71in (18mm)
Platter diameter: 11.81 in (30cm)
Platter weight: 6 lbs (2.7kg) 
Dimensions: 18.25 w x 13.25 d x 7.25 h 
Weight: 40 lbs.
Warranty: 1yr. Limited

Goldring Eroica LX

The Eroica LX is a true audiophile moving coil cartridge which features an advanced pole shoe design using a powerful rare earth Neodymium magnet.

This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the record cartridge, keeping the weight down to just 5.5 g. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus with a low output which means it must be used with an amplifier which features a dedicated moving coil phono input.

The Eroica LX offers an exceptionally high standard of performance and reliability.

 

Frequency Response 20 Hz – 22 kHz 2 dB
Channel Balance within 1 dB @ 1 kHz
Channel Separation better than 25 dB @ 1 kHz
Sensitivity 0.5mV 1dB, 1kHz @ 5 cm/sec
Static Compliance 30 mm/N
Dynamic Compliance @ 10 Hz 18 mm/N
Equivalent tip mass 0.35 mg
Vertical Tracking Angle 24°
Stylus Radius Gyger II
Stylus Type Non-Replaceable
Load Resistance 100 Ω
Load Capacitance 100 – 1000 pF
Internal Inductance 12 uH
Internal Resistance 8 Ω
Cartridge Mass 5.5 g
Cartridge Mass (inc fixings) 6.6 g
Fixing Centre 0.5″ (12.7 mm)
Playing Weight 1.5 – 2.0 g (1.7 g nom.)


Ask about our trade-in program



SHIPPING: The shipping weight on the Music Hall MMF-9.3/9.3SE is 40 lbs.  Shipment by FEDEX Home Delivery/Insured is FREE if your delivery addresses is within the 48 continental states. If your delivery address is in Alaska, Hawaii, Canada or other location outside of the USA, please call (480) 607-2277) or email sales@theaudiolegacy.com to determine the shipping cost and to place your order.  Duties, taxes and fees on shipments to destinations outside of the USA are NOT included in the price.